Do you know how to use the floor washer in winter?

The use of the scrubber machine is not the same in all seasons, and sometimes we need to maintain the machine when it is cooling down, so as to ensure that the equipment is as good as ever.

Let me tell you about the problems that need to be paid attention to in the application of the scrubber machine in the cold temperature in winter.

1. Charging environment

The ideal indoor temperature for charging the floor washer is 25 degrees, and it should not be less than zero when charging in winter. It should not be placed in cold weather to charge outdoors, so that the charging rate will be affected and the battery life will be affected. A non-airtight space in the room is perfect for power storage.

2. Application scenario

The use of the environment is also relatively high, not less than minus 10 degrees, this ambient temperature is already the limit value, even if the rechargeable battery can, but the rubber strip and water pipe of the washing machine is likely to freeze or freeze can not be used.

3. Do not store water in the machine

The water and wastewater in the water storage tank and the water supply pipe need to be treated in time, and can not be used overnight in winter to prevent freezing the next day.

4. Do not use it on landslide slopes

The slope in winter is very easy to be muddy, especially the outdoor will freeze, so pay attention to the use of the ground, scrubber machine can not be pushed through those sites to prevent people from tipping the machine over.

5. Charge immediately

In the cold season, the charge and discharge rate of the machine will accelerate, the charging rate will slow down, and the equipment with 10% of the usual power consumption will need to be changed in winter, and 20% can be charged to prevent the battery power from being insufficient to support the return of the charging point, especially large and medium-sized safe driving equipment.

6. Immediately close the brush tray and adhesive strip

After the application of the scrubber machine, it is necessary to lift the brush parts and rubber strip components in time, and it should be even more so in outdoor equipment to prevent the glue strip from sticking to the brush parts and the ground and freezing the next day.

7. Keep the battery fully charged

During the long holiday, if there is no duty worker, please directly remove the power connection line of the machine and the battery, and install it after the holiday, so as to prevent the battery from running out of power.

Share: